How To Prevent Mold With Spray Foam Insulation

Spread the love

Mold is a white, black, green, orange, or purple fungus that thrives in moisture. Mold reproduces through lightweight spores that can travel through the air. The presence of mold in builds is very difficult to eliminate and harmful to human health. Spray foam contractors are at the forefront of helping people to get rid of mold from their properties. This is because spray foam insulation has a significant impact on limiting the presence of mold as highlighted below.

Signs of mold presence in your properties

Looking closer in properties can easily identify the presence of mold. This is in the form of black spots and undeniable green on wall corners. It is very important to tackle the presence of mold on the first glimpse. Noticing mold presence and or smelling its presence is a sure sign to begin looking for a solution. A musty smell indoors is an indicator of mold in the property. Inhaling mold encourages allergies leading to sneezing, light-headedness, confusion, and confusion.

People should get away from such an environment as soon as possible. Ignoring to take action on exposure to such symptoms has dire consequences on health. Discovering mold presence in a property requires calling for an inspection to discover the source of the problem. This allows coming up with an appropriate solution like spray foam insulation.

Spray foam insulation

Home insulation is very important in all kinds of properties. However, the type of insulation matters with a host of options on the market. The ideal insulation option should have water-resistant properties that keep moisture out. This is where spray foam insulation in Phoenix is the best solution to create an airtight seal. Closed-cell foam insulation prevents outdoor allergens from coming into the property to maintain good indoor air quality. This significantly lowers the cost of using the heating and cooling system.

How spray foam insulation prevents mold

Professional closed cell spray foam insulation makes an airtight barrier to limit air leakage. This is mixing of cold outdoor air with warmer indoor air leading to moisture-related issues and condensation in the cavity walls. Foam insulation expands to fill any space to create an airtight seal in each hole and crevice to minimize the risk of air leakage. Installation of closed-cell spray foam prevents air escape to ensure good ventilation in attics.

Spray foam also limits the presence of mold in properties for not being a food source. The installation of polyurethane foam creates an inhospitable environment with no nutritional value to mold. Additionally, spray foam never decays on exposure to moisture unlike metal and wood. This makes it a wonderfully durable and long-lasting insulation choice for all kinds of properties.

Factors that encourage mold in properties

Water damage

The presence of mold in a property is usually a sign of a larger problem including water damage. A burst pipe or recent flood might encourage water inside properties encouraging mold. Water damage usually goes unnoticed.

So, moisture-related issues in a property should never be ignored. A discolored ceiling requires repainting but shows lurking structural damage. This is likely to escalate into more damaging problems down the road. Mold thrives in warm temperatures, moisture, and material to feed off like wood.

Poor attic insulation

Another cause of mold presence in properties is poor attic insulation. Appropriate insulation doesn’t focus on keeping warm air inside. Buildings in warmer climates can’t do without appropriate insulation. Proper insulation of properties keep cool air indoors and moisture out. Poor insulation leaves gaps that allow humid air to pass through creating an environment where mold thrives.

Leaky pipes

One of the most common causes of mold is leaking pipes. This encourages the presence of mold under-sink cupboards and drywall. Leaky pipes encourage mold in walls and ceilings especially with the source of the leak coming from roof piping or geyser. The presence of mold build up in these areas requires a professional inspection to discover the source of the problem and apply appropriate solutions.

Dampness in the basement

Basements are below ground level making them prone to moisture exposure from floods or seeping moisture. A basement is more likely to have high humidity for lacking appropriate ventilation or air circulation. Exposure to dampness and high humidity makes basements prone to mold growth. Waterproofing the basement is very important to limit water leaks that might accumulate to encourage dampness. Luckily spray foam can waterproof the basement to keep it mold-free.

Dangers of mold present in a property

  • Sets off allergic reactions
  • Triggers coughing and sneezing
  • Encourages respiratory ailments
  • Causes lung infection
  • Increases chances of asthma
  • Structural damage

Bottom line

Properties are prone to mold growth resulting from exposure to moisture and high humidity. Spray foam offers the ultimate insulation solution to create an airtight seal that makes properties safe from mold. Professional contractors need the appropriate equipment to apply spray foam which has no nutritional value to mold.